It's with the paint thinner. As for the "recipe" - just do some algebra. Originally Posted by Juker Can Toluene or Xylene be used solely, without mixing it with 93? Is there a max as to the ammount of Toluene or Xylene that can be used in a tank? Are either corrosive? Xylene is more corrosive than Toluene. Same thing here.
You have to have some license to buy Toulene or Xylene now. Home Depot took it off the shelves. They have some other paint thinners that don't have either Toulene or Xylene. We used to be able to get it at Sherwin Williams any time, but we went in last week, and they said we need a license to buy it now?
Just go with some straight up leaded racegas and run no O2 sensors or cats if you need octane that high - it'll be more economical and more of a "sure bet.
A word of Internet Forum wisdom: Disregard any advice that begins with "I've heard Page 1 of 2 1 2 Last Jump to page:. Bookmarks Bookmarks Digg del. All times are GMT The time now is PM.
It still appears strong enough to thin all common oils, varnishes and oil paints. The disadvantage of odorless mineral spirits, of course, is that it is considerably more expensive because of the extra steps necessary to produce it. You may find the extra expense worth it just to avoid the unpleasant odor of regular mineral spirits. The turpentine substitutes, turpatine and T. These petroleum substitutes have a solvent strength closer to naphtha and an evaporation rate closer to mineral spirits.
So they are useful to fine artists but provide no special benefit to wood finishers. Alcohol is an entirely different solvent than petroleum distillates. It is used as the solvent and thinner for shellac. Alcohol both dissolves and thins shellac. For more on dissolving and thinning, see What Dissolves and Thins What. There are two types of alcohol available at paint stores: methanol methyl alcohol and denatured alcohol shellac thinner.
Methanol evaporates a little faster than denatured alcohol, but methanol is toxic and could blind or even kill you if you breathe too high a vapor concentration for too long. This is the alcohol you should use with shellac. In situations where shellac is not the finish, denatured alcohol has the further use as a felt-tip-pen ink remover. Dampen a cloth with denatured alcohol and wipe over the mark. You will remove it in most cases. Both acetone and MEK are very strong high solvent strength and fast evaporating solvents.
Acetone evaporates faster than MEK and, in fact, is the fastest evaporating of all the solvents commonly available to consumers. It is used in many industries as a cleaner and degreaser. In wood finishing acetone is used as a solvent for lacquers and, along with MEK, as a common ingredient in paint removers.
You can add acetone to lacquer and shellac to get them to dry faster in cold temperatures. Acetone is also the most effective solvent for removing the oily resin from the surface of some exotic woods, including teak, wenge and cocobolo, before gluing with a water-based adhesive or finishing with an oil or varnish.
Acetone is unique in that it is the only common solvent that is exempt as a VOC volatile organic compound and HAP hazardous air pollutant. VOCs are environmental smog pollutants. HAPs are bad for us to breathe. Both are regulated and their use is limited in many parts of the country.
You can use as much acetone as you want, everywhere. Sunnyside Acetone will leave a residue free surface in preparation for painting. No, Sunnyside Paint Thinner is used only with oil based paints. Green Envy Paint Thinner can be used with water based coatings as well as most oil based coatings. Sunnyside Xylol is commonly used for thinning this type of paint. Always consult and follow the paint manufacturer's directions before thinning.
Yes, Sunnyside Mineral Spirits will work well for this purpose. Petroleum distillates are the fuels and solvents that are produced from the distillation of petroleum. Mineral spirits, naphtha, kerosene and gasoline are examples of petroleum distillates. Sunnyside Mineral Spirits will work well for this purpose. Provide cross ventilation and follow all label warnings. No, it contains water and would not be ideal for this application. Use Sunnyside Mineral Spirits. Xylol will loosen many acrylic sealers, and can be used on concrete.
Because it is flammable, eliminate all ignition sources. Contact sealer manufacturer for additional information. Sunnyside Mineral Spirits does not have an expiration date if stored in its original, tightly capped container. Acetone will extract natural oils from the leather causing it to dry and crack.
Use mild leather cleaner or consult dry cleaner.
0コメント